SuperMicro X9DRI-F 2x E5-2620v1 8GB Heat Sink IO

SuperMicro X9DRI-F 2x E5-2620v1 8GB Heat Sink IO
SuperMicro X9DRI-F 2x E5-2620v1 8GB Heat Sink IO
SuperMicro X9DRI-F 2x E5-2620v1 8GB Heat Sink IO
SuperMicro X9DRI-F 2x E5-2620v1 8GB Heat Sink IO
SuperMicro X9DRI-F 2x E5-2620v1 8GB Heat Sink IO
SuperMicro X9DRI-F 2x E5-2620v1 8GB Heat Sink IO

SuperMicro X9DRI-F 2x E5-2620v1 8GB Heat Sink IO
SUPERMICRO X9DRi-F MOTHERBOARD 2x E5-2620 8GB DDR3 2x HEATSINK 1x I/O Shield. All motherboards are fully loaded up when testing to ensure that all sockets are 100% working. CPU: 2x Intel Xeon E5-2620. Memory: 8GB DDR3. NIC: Quad Port 1GbE. 2x Passive Heatsinks. Dual socket R (LGA 2011) supports Intel® Xeon® processor E5-2600 and E5-2600 v2 family. Intel® C602 chipset; QPI up to 8.0GT/s. Up to 1TB ECC DDR3, up to 1866MHz; 16x DIMM slots. Expansion slots: 3x PCI-E 3.0 x16 and 3x PCI-E 3.0 x8. Intel® i350 Dual port GbE LAN. 8x SATA2 and 2x SATA3 ports. Integrated IPMI 2.0 and KVM with Dedicated LAN. 11x USB 2.0 ports (4 rear, 6 via header + 1 Type A). X9DRi-F (Standard Retail Pack). 12″ x 13″ (30.5cm x 33.2cm). Dual Socket R (LGA 2011). Intel® Xeon® processor E5-2600 and E5-2600 v2 family. (up to 135W TDP). BIOS version 3.0 or above is required. Motherboard supports this maximum TDP. Please verify your system can thermally support. QPI up to 8 GT/s. 16x 240-pin DDR3 DIMM slots. Up to 1TB DDR3 ECC LRDIMM. Up to 512GB DDR3 ECC RDIMM. Up to 128GB DDR3 ECC/non-ECC UDIMM. 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs. Support ECC and non-ECC UDIMMs Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed. 32GB, 16GB, 8GB, 4GB, 2GB, 1GB, 64GB LRDIMM. 1.5 V, 1.35 V. Detects double-bit errors (using ECC memory). SATA 2.0 3Gb/s with RAID 0, 1, 5, 10 SATA 3.0 6Gb/s with RAID 0, 1, 5, 10. SCU SATA (Storage Controller). SATA 2.0 3Gb/s with RAID 0, 1, 5, 10. Support for Intelligent Platform Management Interface v. IPMI 2.0 with virtual media over LAN and KVM-over-LAN support. Intel® i350 Dual Port Gigabit Ethernet. Virtual Machine Device Queues reduce I/O overhead. Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output. 1x Realtek RTL8201N PHY (dedicated IPMI). 2 SATA 3.0 ports (6Gb/s). 4 SATA 2.0 ports (3Gb/s). 2 RJ45 Gigabit Ethernet LAN ports. 1 RJ45 Dedicated IPMI LAN port. 11 USB 2.0 ports total (4 rear + 6 via header + 1 Type A). Serial Port / Header. 2 Fast UART 16550 ports: 1 rear and 1 header. 1 DOM (Disk on Module) power connector. Chassis (Optimized for X9DRi-F). Tower / 4U Rackmount. To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details. SuperServer(s) with X9DRi-F. 3x PCI-E 3.0 x16 slots. 3x PCI-E 3.0 x8 slots Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details. 128Mb SPI Flash EEPROM with AMI BIOS. Plug and Play (PnP). ACPI 1.0 / 2.0 / 3.0 / 4.0. SMBIOS 2.7.1. UEFI 2.3.1. IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support. Optional IPMI 1.5 / 2.0. ACPI / APM Power Management. Main Switch Override Mechanism. CPU Fan auto-off in sleep mode. Power-on mode for AC power recovery. Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, 4 Memory Voltages. 5+1 Phase-switching voltage regulator. 8x 4-pin fan headers (up to 8 fans). 8x fans with tachometer monitoring. Status monitor for speed control. Status monitor for on/off control. Low noise fan speed control. Pulse Width Modulated (PWM) fan connectors. Monitoring for CPU and chassis environment. CPU thermal trip support. Thermal Control for 8x Fan Connectors. C temperature sensing logic. Thermal Monitor 2 (TM2) support. CPU / System Overheat LED. 10°C – 35°C (50°F – 95°F). 40°C – 70°C (-40°F – 158°F). Operating Relative Humidity Range. 8% – 90% (non-condensing). Non-Operating Relative Humidity Range. 5% – 95% (non-condensing). The item “SuperMicro X9DRI-F 2x E5-2620v1 8GB Heat Sink IO” is in sale since Thursday, April 16, 2020. This item is in the category “Computers/Tablets & Networking\Computer Components & Parts\Motherboard & CPU Combos”. The seller is “unixsurplusnet” and is located in Santa Clara, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay.
  • Socket Type: LGA2011
  • Number of CPU Cores: 6
  • Expansion Slots: PCI Express x16
  • Input/Output Ports: Ethernet (RJ-45)
  • CPU Clock Speed: 2.0Ghz
  • Memory Type: DDR3
  • CPU Brand: Intel
  • Features: On-Board Video Chipset
  • Motherboard Brand: Supermicro
  • CPU Series: Xeon
  • CPU Bus Speed: 7.20GT/s
  • Number of Memory Slots: 16
  • Form Factor: Extended ATX

SuperMicro X9DRI-F 2x E5-2620v1 8GB Heat Sink IO
Social tagging: > > > >

Comments are closed.